Specialty Pigments

Specialty pigments are bought for a property that ordinary colour does not have: compliance with a halogen limit, stability at a temperature where organic pigments fail, a colour that appears only under sunlight, or a black that does not conduct in an insulating part..

Specialty pigment powders in trays beside colour paste samples on a workbench

Specialty pigments are bought for a property that ordinary colour does not have: compliance with a halogen limit, stability at a temperature where organic pigments fail, a colour that appears only under sunlight, or a black that does not conduct in an insulating part.

This series collects eleven products that sit outside the standard colour ranges. Each page states the property, the number behind it, and the process where the product is actually used. Where a product corresponds to an existing grade range, the page links to that range for grade-level data rather than repeating it.

Products in this series

Low-Halogen Pigment Paste

Pigment paste with total halogen below 50 PPM for 3C housings, appliance panels and electrical components.

View product

Epoxy Resin Color Paste

Epoxy system colour paste for high-temperature pultrusion and structural composites.

View product

Bright Red Pigment Paste

Bright red paste with grade 8 light fastness in water-based and solvent-based versions.

View product

Deep Royal Blue Pigment Paste

High-concentration deep royal blue paste with typical addition as low as 1% for FRP profiles.

View product

Water-Based Pigment Paste

Water-based paste with high hiding power and no lap marks for floors, courts and architectural coatings.

View product

Extra Black Pigment Paste

Extra black paste on ozone-treated carbon black with weak conductivity, for BMC, bakelite and SMC parts.

View product

Coated Iron Oxide Yellow

Surface-coated iron oxide yellow, heat resistant to 240 °C and stable up to 260 °C processing without reddening.

View product

Photochromic Pigment Paste

Reversible photochromic paste, colourless indoors and coloured in sunlight, recommended at 3–5%.

View product

High-Temperature Epoxy Pigment Paste

Epoxy pigment paste heat resistant to 300 °C, with long-term service above 230 °C.

View product

Zinc Iron Yellow (Zinc Ferrite)

Zinc ferrite yellow DY-300, heat resistant to 300 °C and free of heavy metals.

View product

Iron Black Color Paste

Iron black paste heat resistant to 650 °C with outdoor weatherability exceeding 20 years.

View product

Request Technical Data

Tell us the system and the property you need to meet, and we will send the data sheet for the matching product.

Request Technical Data