Zinc Iron Yellow (Zinc Ferrite)

Zinc ferrite yellow DY-300, heat resistant to 300 °C and free of heavy metals.

Metal parts passing through a powder coating spray booth

Replacing chrome yellow and cadmium yellow is not a colour swap. Both have accumulated advantage in saturation and hiding power, and a mixed-metal oxide yellow has to come close on both while meeting RoHS and EN71.

This product is zinc iron yellow DY-300, heat resistant to 300 °C and free of heavy metals. It is positioned as an eco-friendly replacement for chrome yellow and cadmium pigments.

Used in high-temperature powder coatings including epoxy and polyester electrostatic powder paints, high-temperature anti-corrosion powder coatings and hardware and appliance powder finishing, withstanding 180–220 °C curing and short high-temperature baking without colour change or yellowing and resisting long-term fading and chalking. Applied to coil and fluorocarbon industrial coatings for colour steel and aluminum coils, curtain wall, silicone high-temperature and pre-coated panel paints, providing stable colour under high-speed baking and salt-spray resistance while improving environmental compliance for export and high-end projects. Also serves engineering plastics and high-temperature masterbatches for ABS, PP and PA, automotive and electronic plastic parts, with processing stability above 300 °C, and eco-friendly replacement of toxic pigments in toys and food-contact materials meeting RoHS and EN71, outdoor architectural and municipal engineering coatings, and high-temperature inorganic functional coatings such as ceramic glazes, enamels, refractory colouring and sintered colorants with resistance up to 600 °C.

Replacement of a chrome or cadmium yellow starts from the target shade and works back to the addition level, because tinting strength and hiding differ between pigment chemistries. The comparison is made on the same binder and film build, and cost is calculated per kilogram of finished paint rather than per kilogram of pigment.

Tinting strength of a mixed-metal oxide yellow is below that of an organic yellow. Replace by re-calculating addition and formulation cost, not by equal loading.

Discuss Your Application

Send the substrate, process and service conditions, and we will confirm whether this product fits or propose an alternative.

Discuss Your Application