Powder Coatings
Pigment pastes for polyester-TGIC, epoxy and hybrid powder coatings on hardware, appliances, aluminium profiles and automotive parts.

Powder coatings are applied dry and cured without solvent, so every component in the formulation has to survive extrusion and the cure oven without volatilising. Pigments are no exception. A grade that shifts shade at extrusion temperature, or that interferes with the TGIC or epoxy cure, shows up as a colour change or a gloss loss in the finished film that cannot be corrected afterwards.
The systems in use are polyester-TGIC for exterior durability, epoxy for chemical and corrosion resistance, and polyester-epoxy hybrids for interior applications. Hardware, home appliances, aluminium profiles and automotive components are the main outlets.
Extrusion is where a powder coating formulation is decided. The resin, curing agent, filler and pigment are compounded above the softening point of the resin, then cooled and flaked before grinding, and any component that is not fully compatible with the melt becomes visible later as a speck, a streak or a loss of gloss after cure. Because the film is thermally cured and then often formed or impacted in service, colour stability has to be judged after the full cure rather than on an extruded chip. Hiding matters as much as shade in a single-coat system, which is why grade selection here is a question of pigment body and loading rather than of colour alone.
Products for this route
Iron Oxide Red (Bayer synthetic α-Fe₂O₃)
Used in polyester and epoxy powder coatings and in powder paints for hardware, home appliances and aluminium profiles. The synthetic α-Fe₂O₃ body gives consistent shade and opacity at the loadings powder coatings require, and its heat and light resistance addresses outdoor fading and chalking. The same grade also serves industrial anti-corrosion paints, steel structure finishes, automotive parts and exterior wall coatings.
Request technical dataWT-5750 Water-Based Yellow Paste
Used in polyester and epoxy powder coatings and industrial baking enamels where the yellow shade has to hold through the bake.
Full description under Water-Based Coatings and InksRelated Applications
Request Technical Data
Send us the resin system, application method and service conditions for powder coatings, and we will confirm the grade and the supporting data.