Water-Based Coatings and Inks

Water-based yellow and water-soluble gray pastes for industrial coatings, automotive primers, packaging inks and low-VOC baking enamels.

Flexographic printing press running water-based ink on a packaging production line

Water-based systems replace solvent with water and a co-solvent package, which changes the drying behaviour and the compatibility requirement of every component. A pigment paste has to be stable in the aqueous phase without settling, must not raise volatile organic content beyond the limit the system is designed to meet, and must hold its shade through a bake that is often faster and hotter than a solvent-based equivalent.

Food packaging inks add a further constraint, because the printed film is in contact with food and the pigment has to meet the compliance requirement of that chain rather than only the appearance requirement.

The aqueous phase is less forgiving of formulation drift than a solvent system. Water has a higher surface tension, so substrate wetting and foam control belong to the same problem, and a paste that is not fully stabilised settles in the tank or separates in the drum. Bake schedules for water-based systems are frequently shorter and hotter, which puts the pigment under a different thermal load than the solvent-based equivalent and makes shade retention through the oven a selection criterion rather than a finishing detail. For food packaging, compliance is decided by the migration behaviour of the whole ink film rather than by the pigment alone.

Products for this route

WT-5750 Water-Based Yellow Paste

Used in water-based industrial coatings, automotive primers, and anti-corrosion coatings for construction machinery and steel structures; water-based gravure and flexographic inks and food packaging inks; halogen-free colouring of plastics for electronics and electrical appliances; textile printing and water-based coatings; polyester and epoxy powder coatings and industrial baking enamels; and PP/PE/ABS engineering plastic masterbatches and dope dyeing of chemical fibres. It addresses outdoor fading and chalking, packaging colour bleeding, high-temperature discoloration and halogen-free compliance.

WT-5750 in the water-soluble series

Medium Gray Paste (water-soluble baking paste)

Used in amino baking paints and industrial baking paints for hardware and appliances; insulating paints, transformer paints, motor insulating paints and high-voltage protective paints; anti-corrosion paints for steel structures, pipes, machinery and containers; paints for automotive interiors, parts, chassis protection and new energy structural parts; and alcohol-based low-VOC and food-contact coatings. It resolves flooding and mottling, reduced water resistance, and insulation and low-VOC compliance.

Request technical data

Request Technical Data

Send us the resin system, application method and service conditions for water-based coatings and inks, and we will confirm the grade and the supporting data.