High-Temperature Epoxy Pigment Paste

Epoxy pigment paste heat resistant to 300 °C, with long-term service above 230 °C.

Fasteners hanging on a conveyor entering a dip coating bath

Fastener coatings and high-temperature anti-corrosion fail in two different ways. The fastener has to survive high-speed dip and spin-off and still look uniform; the anti-corrosion coating has to survive service above 230 °C without losing gloss or chalking.

This product is heat resistant to 300 °C, with long-term service above 230 °C without fading, chalking or loss of gloss.

Used in screw and fastener coatings including self-tapping screw paints, fastener anti-corrosion paints, bolt and nut coatings, standard blackening finishes and high-strength screw topcoats, retaining colour and performance at high temperatures and producing smooth glossy high-hiding black films suitable for high-speed dip and spray application. Applied to phenolic-modified epoxy anti-corrosion coatings for high-temperature container inner walls, chemical equipment, heat-resistant primers and pipe linings, without affecting chemical and heat resistance or film integrity. Also serves high-temperature industrial epoxy protective coatings for equipment, kiln surroundings, metallurgical machinery and thermal power equipment, with long-term service above 230 °C without fading, chalking or loss of gloss. Further covers electronic epoxy potting and encapsulation, recoatable high-build epoxy systems for floors and marine heavy-duty paints, and electromechanical hardware and automotive parts baking enamels requiring uniform black impact-resistant and batch-stable finishes.

On fasteners the film is thin and the geometry is difficult, so coverage at thread roots and under heads decides whether a part passes. Colour and gloss are checked on the assembled part rather than on a flat test panel, because the same film reads differently on a curved, shadowed surface.

300 °C is the heat resistance ceiling, not a continuous service temperature. Design long-term service around 230 °C and keep margin between the two.

Discuss Your Application

Send the substrate, process and service conditions, and we will confirm whether this product fits or propose an alternative.

Discuss Your Application