Water-Based Anti-Settling Agent

Polyurea-structured anti-settling agent for high-pigment-load water-based coatings, inks, adhesives and electronic materials.

Stainless mixing tank agitating a high-load pigment slurry

Settling in a high-load system is not a surface phenomenon. Once hard sediment forms, stirring does not recover it and the batch is lost. The value of an anti-settling agent is keeping the sediment in a state that can be redispersed.

This product is polyurea-structured and intended for high-pigment-load systems. Its thermal decomposition temperature is 350 °C.

Used in water-based daily chemical and personal care products including hand sanitizers, industrial detergents, bath gels, facial cleansers, wash gels, scrubs and aqueous skincare formulations, preventing settling of scrub particles, actives and pigments without irritation and without affecting viscosity, flow or skin feel, extending shelf life across a wide pH range. Applied to water-based coatings, inks and adhesives such as industrial paints, latex paints, inks, adhesives, pigment pastes and potting compounds, preventing pigment and filler settling and hard sediment, improving anti-flooding and anti-mottling and maintaining uniform film colour. Also used in automotive and high-temperature industrial baking paints, where the polyurea structure prevents settling of pigments, aluminum and pearlescent powders with a thermal decomposition temperature of 350 °C, and in UV/EB curing systems and electronic materials such as thermally conductive, potting, conductive, underfill and structural adhesives, preserving uniform conductivity and thermal performance with electronic-grade high-temperature stability.

Rheology additives are evaluated in the finished system rather than in a solvent blend, because pigment and filler loading changes the response to shear. A sample left standing for the storage period and then stirred at low speed shows whether the sediment redisperses or has hardened, and that observation matters more than the initial viscosity reading.

Polyurea rheology additives are sensitive to shear history. The stage at which they are added and the shear applied afterwards both change the final thixotropy, so fix the addition point in the process rather than only the percentage.

Discuss Your Application

Send the substrate, process and service conditions, and we will confirm whether this product fits or propose an alternative.

Discuss Your Application