Curing Agent Oil-Based Pigment Paste

Resin-free, oil-soluble paste for colouring the curing agent component of two-component PU and epoxy systems.

Two-component coating mixing station where resin and hardener are combined before application

Two-component systems can be coloured either in the base resin or in the curing agent. The first route is limited by the storage stability of the base resin; the second is limited by the reactivity of the curing agent. The second is the harder one, because isocyanate and amine components are sensitive to moisture and hydroxyl content.

This product is a resin-free, oil-soluble pigment paste developed specifically for colouring the curing agent component. Its water content is extremely low, which is the property that decides whether the mixed film develops bubbles.

Applied to two-component polyurethane coatings and adhesives including polyurethane industrial paints, automotive refinish paints, PU adhesives, electronic potting compounds and sealants, where it can be added to the isocyanate curing agent without affecting storage stability of the base resin, and its extremely low water content prevents bubbles and pinholes while preserving crosslink density and bonding strength. Also used in epoxy coatings and curing systems such as anti-corrosion paints, epoxy floor paints, potting compounds, adhesives and electronic epoxy packaging, showing good compatibility with cycloaliphatic, polyether and fatty amine curing agents without affecting hardness, adhesion or chemical resistance. Supports special processes such as split-package colouring, on-site tinting, fast-curing two-component coatings and automated proportioning lines, and fine electronic and automotive coating requiring uniform, particle-free, non-migrating and environmentally compliant results.

Colour is normally judged on the mixed film, so the curing agent has to be checked at the ratio the applicator will actually use. Where the curing agent is tinted in a separate container, agitation before proportioning matters as much as the paste itself, because a settled tint changes the colour-to-hardener ratio from drum to drum.

Adding colour to the curing agent changes the pot life of the mix. Re-verify working time at the on-site ratio rather than only in the laboratory.

Discuss Your Application

Send the substrate, process and service conditions, and we will confirm whether this product fits or propose an alternative.

Discuss Your Application