Rubber, Sealants and Adhesives

Synthetic iron oxide red for rubber, seals, tires, shoe soles, adhesives, sealants and potting compounds.

Rubber seal profiles on a manufacturing line after vulcanisation and trimming

Rubber compounds and sealants are coloured for identification and for appearance, and both are exposed to conditions that coatings are not: sulphur cure, plasticiser migration and long-term compression. A pigment that reacts with the cure system produces a shade shift that cannot be corrected after the part is moulded, and one that migrates to the surface produces the bloom that is the classic complaint in this industry.

Iron oxide pigments are the practical choice here because they are chemically inert, do not bloom and hold shade through vulcanisation.

Synthetic iron oxide is chemically inert as a pigment body and does not react with sulphur vulcanisation systems, peroxide cure systems or accelerators, so it leaves the cure curve unchanged. Its surface carries no migratable low-molecular fraction, which is why it does not travel to the surface under long-term compression and heat ageing and does not produce bloom. In peroxide-cured compounds it does not capture free radicals the way some organic pigments do, so crosslinking proceeds without the inhibition those pigments can cause. In sealants and potting compounds the heat and weather resistance of the iron oxide lattice keeps the shade stable through outdoor exposure, where organic colourants typically shift first.

Vulcanisation is the decisive step. The cure package reacts with the pigment surface as well as with the rubber, and a pigment that takes part in that reaction leaves the compound either under-cured or discoloured, with the effect appearing after the part is demoulded. Plasticisers and process oils migrate through the compound over time, and a pigment that travels with them reaches the surface as a bloom. Compression set and sealing force are the properties that matter in a seal, and they are set by the compound rather than by the colour, which is why an inert pigment that stays where it is put is the only useful choice here. For a seal, colour is also a production check: an even shade across a batch is the quickest indication that the compound was mixed uniformly.

Products for this route

Iron Oxide Red (Bayer synthetic α-Fe₂O₃)

Used in rubber, seals, tires, shoe soles, adhesives, sealants and potting compounds; the synthetic α-Fe₂O₃ body and its heat resistance are described under Powder Coatings.

Full description under Powder Coatings

Request Technical Data

Send us the resin system, application method and service conditions for rubber, sealants and adhesives, and we will confirm the grade and the supporting data.