PET-5000
Blow Molding Carbon Black Masterbatch
Technical Specifications
| Model | PET-5000 |
| Appearance | Black pellets |
| Carbon Black Grade | Nano furnace black, 300 nm |
| Optical Character | High-opacity jet black |
| Carrier Resin | PET-compatible polymer |
| Dye Content | None (100% dye-free) |
| Migration / Plate-out | None |
| Recommended LDR | 4% (2–6% adjustable) |
| Typical Processes | ISBM / EBM blow molding, injection |
| Food-contact Status | FDA compliant |
Key Features
300 nm Ultra-Fine Particle: Maximum jetness (My value) with blue undertone for the deepest, most premium black.
Superior Blackness & Gloss: High-gloss, mirror-like finish for premium shelf appeal in cosmetic and personal-care packaging.
Dye-Free, Anti-Migration: No bloom, no rub-off, no staining of contents or closures.
Solvent & Chemical Resistant: Stable against alcohol, oils and surfactants for personal-care and household formulations.
Low Filter Pressure Value: 300 nm dispersion ensures no specking, no filter blockage in high-cavity preform tools.
Performance & Compliance
Dye-Free & Non-Migrating
Pigment-only coloration. No acid dyes means no migration into contents, no plate-out on preforms or molds, and no surface bloom over shelf life.
n-Hexane & Oil Resistance
Withstands fatty and oily contents including edible oils, essential oils and lipid-based cosmetics without color bleed or loss of blackness.
No Exudate / Precipitation
Carrier and dispersant fully bound in the PET matrix; no specks, streaks or deposits during processing or after filling.
Long-Term Alcohol Resistance
Stable in prolonged contact with ethanol-based products — sanitizers, perfumes, colognes and alcohol-containing personal-care formulations.
Acid & Alkali Resistance (pH 3–9)
Performs across acidic beverages (pH 3) through alkaline cleaners and soaps (pH 9).
Weather & UV Resistance
Carbon black provides inherent UV screening, extending shelf life of light-sensitive contents while maintaining color outdoors.
Regulatory Compliance
USA — FDA
Compliant with FDA 21 CFR for food-contact packaging
European Union
Suitable for food contact under EU Regulation 10/2011
EU REACH
Free of SVHC candidate-list substances above 0.1%
RoHS
Compliant with Restriction of Hazardous Substances directive
Heavy-metal free
No cadmium, lead, mercury or chromium(VI)
Azo-dye free
No banned azo colorants
Applications
Food & Beverage
- CSD bottles
- Water bottles
- Juice / coffee / tea / energy drinks
- Edible oil / vinegar / soy sauce
- Beer / cider (UV block prevents skunky flavor)
- Sauces / condiments
Personal Care & Cosmetics
- Shampoo / body wash
- Shower gel / hand sanitizer
- Lotion / cream / serum pumps
- Perfume / cologne bottles (alcohol contact)
- Hair color / styling
- Cosmetic jars / closures
Household, Industrial & Chemical
- Laundry detergent
- Dishwashing liquid
- Automotive chemicals
- Agrochemicals
- Lubricants / adhesives
- Pet care
Pharmaceutical & Nutraceutical
- Medicine bottles
- Vitamin / supplement bottles
- CBD / essential oil / aromatherapy (UV-critical)
- Diagnostic reagents
- Light-sensitive supplements (fish oil, probiotics)
Processing Guide
| Parameter | Value |
|---|---|
| Drying | Predry at 65–80°C for 4–6 hours (dehumidifying dryer, <50 ppm moisture) |
| Let-down ratio | 4% standard; adjust 2–6% for desired opacity (PET-1000 lower LDR = translucent grey; PET-5000 at 4% = full optical black) |
| Melt temperature | 260–285°C; avoid prolonged residence above 290°C |
| IV loss | <0.02 dL/g under standard ISBM conditions |
| Dispersion | 300 nm primary particle, low FPV, no specking, no filter blockage |
| rPET compatibility | Compatible with bottle-to-bottle regrind and food-grade rPET |
